Ethernet Extension Experts                

The Enable-IT™ 350 48VDC Power over Ethernet Injector is single port IEEE 802.3af compliant Midspan solution that is a compact and easy to install with RJ-45 Ethernet cabling. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

The Enable-IT 350 PoE Injector can be used with the Enable-IT 380 PoE Range Extender/s to drive your full PoE strength up to 7,200ft.

The 350 unit is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3af compliant device, the Enable-IT 350 48VDC Power over Ethernet Injector uses all 8 wires in a category rated wiring bundle, ie. CAT5e run. As will all PoE voltage drops over distance. As a rule of thumb you will loose 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring. The Enable-IT 350 is a 48V power injector to maximize your distance and output.

Product Highlights

• Can be used in conjunction with Enable-IT 380 PoE Range Extender/s up to 7,200ft.
  
• 48 VDC 802.3af compliant PoE Injector uses existing Ethernet cabling for strong output for your PoE devices.
• Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
• Quick install RJ-45 connection to infrastructure for data input and PoE/data output.
• Pricing ($45) is for a 350 PoE Kit

     For detailed installation and printable product information, please see the following
      documents.

Enable-IT 350 Datasheet


Enable-IT 350 Manual