The Enable-IT™ 860 - 100Mbps Full Duplex Ethernet Extender Kit - The World's Highest throughput
The
Enable-IT™ 860 Single-Line Ethernet Extender is a 1-pair VDSL2 solution that
drives true 100MB throughput Ethernet data and single voice line up to 3,000ft or 915m
distance over a 1-Pair (2 wire) telephone line wiring or better.
Hands down these are the highest throughput performing Ethernet Extenders on the planet, bar none. These units are the most reliable and easy to install on any wiring.
They put the over priced and lower performing competition to shame.
The 860 Series Solution is a pair of Ethernet line drivers that utilize
existing 1-pair CAT 2 Telco wiring or better between each 860 series
unit. The extenders stretch the reach of Ethernet to nine times the
typical IEEE Ethernet specification distance of 328ft or 100m. It can
even be used on live voice wiring transparently; try that with your
expensive LRE. No other Ethernet Extender manufacturer supports
voice over the same pair of wire with data. Only Enable-IT
extenders can.
To increase the durability and extended use of the product providing
maximum future technology protection, 860 Extended Ethernet Units have
been designed to meet the challenge of modern switched LANs and allows
you to add features and capacity as your network expands. The 860 units
have been tested to provide full duplex transport up to 100MB/s over
CAT2 cabling or better.
Product Features
Product Specifications
5v country specific adapters included.
100Mbps full-duplex, Data & Voice transmission
Ethernet: RJ-45 Standard 10 or 100 Base-TX (fixed by your LAN device)
Voice/Data Line: RJ-11 - Single line
Height 1" (30mm) Depth 3" (85 mm) Width 2" (60mm)
Operational Temperature : 13°-140°F (-25°-60°C)
Humidity: 5%-90%, non-condensing
Square metal casing with dual Telco / single Network port
Product Highlights
For detailed installation and printable product information, please see the following
documents.
