The Enable-IT™ 8916  - Ethernet Extender DSLAM Concentrator

Enable-IT 8916 Ethernet Extender The Enable-IT™ 8916 Multi-Line Ethernet Extender Concentrator is a 1-pair solution that drives Ethernet data and voice lines up to 7,500ft or 2.2km distance over a 1-Pair (2 wire) telephone line wiring or better.

The 8916 LRE pushes data and voice simultaneously through existing telephone line to the 8910 LRE CPE units. The 8916 aggregates its upstream and downstream bandwidth through (4) dedicated 100MB ports to your Ethernet switching equipment or routers.

Each port on the 8916 supports 100MB full duplex to the remote (16) 8910 LRE CPE units. For use with Enable-IT 8910 LRE CPE units only, available individually.
The 8916 LRE Controller kit includes the following:
(1) Rackmount 8916 with (16) Voice IN RJ11 Telco ports and (16) Voice and Data OUT RJ11 ports
(4) 100MB uplink ports- (2) trunking) and (1) Console port
(1) 8916 User and installation Manual
(1) Country specific power cord.
 Enable-IT 8916 Ethernet Extender Diagram

Product Features

  • (16) individual secured extended Ethernet lines in a single 8916 rackmount controller.
  • Maintains lifeline POTS service (one analog or digital phone line).
  • Rapid Telco style installation - no programming required.
  • Supports IP routing, DHCP addressing, NAT-Network Address Translation.
  • Supports VoD (Video on Demand) and MPEG IP channels.
  • Supports VoIP (Voice over IP).
  • Network Equipment independence - Transparent to protocols/applications/MAC.
  • Supports QoS: IEEE802.1p/q.
  • Supports VLAN : 802.1Q tagged VLAN / Port based VLAN.
  • Supports Multicast : IGMP snooping.
  • Management
     - Telnet
    - MAC address number limit
    - DHCP client Function
    - Provide Console port(RS-232C)
    - SNMP v1, MIB II
  • Ethernet multicast / broadcast storm packet control and Flow control
  • Supports load sharing by port trunking (A,B uplink port)
  • Security
    - login account mgmt
    - Connection timeout
    - Remote IP access limit
  • 10/100 Mbps full-duplex service delivery to 8910 CPE (purchase as needed).

Product Highlights

  • Dramatic cost reduction over any competing technology.
  • Broadband Technology that delivers extended Ethernet over existing 2 pair telephone wiring or better up to 7,500' including active POTS line. This means no new wiring is required
  • Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
  • Quick install RJ-45 & RJ-11 connection to infrastructure for voice in and voice & data out.
  • Rapid installation of 1U Rackmount profile

Product Specifications

  • Compatibility
        IEEE802.3, IEEE802.3u 10/100 Base-TX.
  • Data Rate
        25M~100Mbps full-duplex, Data & Voice transmission.
  • Modulation
        QAM (Quadrate Amplifier Modulation)
  • Capacity
        LRE: 16 x LRE Ports (RJ-11 telco port )
        UPLINK: 4 x 100 Base-TX Ethernet port.
  • Interface
        Ethernet: RJ-45 Standard 10/100 Base-TX
        Voice/Data Line: RJ-11.
  • Power Consumption
        AC:90~240(90~254V)VAC,50/60Hz(47~63Hz),
        Power: 50W(Max).
  • Dimensions
        Height 45mm
        Depth 19" Rackmount 1U
        Width 390mm.
  • LED Display
        Subscriber Link : Display VDSL line sync
        LINK/ACT : 10/100-Base-TX status / Data TX/ RX
        10/100M : 10/100 Base-TX Speed(10M/100M)
        HALF/FULL : 10/100 Base-TX Transmission
        Mode
         PWR : System power supply
         ALM : System CPU error.
  • Environment
        Operational Temperature : 0∞C ~50∞C
        Humidity : 10%~90%, non-condensing.
For detailed installation and printable product information, please see the following documents.

Enable-IT 8916 Datasheet


Enable-IT 8916 Manual


Add to :  Add to Del.icio.usDel.icio.us | Add to Digg thisDigg  | Add to redditreddit | Add to Y! MyWebY! MyWeb | NewsVineSeed Newsvine