The Enable-IT™ 8935  - 1-pair 24 port Extreme Distance Concentrator

Enable-IT 8930 Extreme Distance Ethernet The 8935 Multi-Line Concentrator is a 1-pair solution that drives Ethernet data and voice lines up to 22,000ft or 6.5km distance over a 1-Pair (2 wire) telephone line wiring or better.   The 8935 is an 24 port ADSL2+ DSLAM unit that provides a maximum downstream rate up to 24 Mbps to the 830 LRE CPE units.

The Enable-IT 8935 concentrator and 830 Ethernet modems are ideal for those seeking to run Ethernet communications at extreme distances without the use of expensive fiber transceivers or special wiring.   Each port on the 8935 supports 24MB downstream & 2.2MB upstream to the remote (24) 830 LRE CPE units.

The Enable-IT 8935 is compliant with ITU Annex A, G.992.5, G.992.3, G.992.1, and features the multiple Link Status LED indicators in a front panel for easy diagnostics. This ADSL2+ technology is an enhanced version of the ADSL technology, which provides cross-talk free deployment.

The 8935 LRE Controller kit includes the following:
(1) Rackmount 8935 with (2) RJ-21 telco ports and RJ-21 cables ( Voice In and Voice/Data Out)
(1) 66 Telco punchdown block w/ RJ-21 connector
(1) 100MB uplink port
(1) DB9 serial Console port
(1) 8935 User and installation Manual
(1) Country specific power cord
           Enable-IT 8935 Ethernet Extender Diagram

Product Features

  • (24) individual secured extended Ethernet lines in a single 8935 rackmount controller.
  • Delivers 24Mbps down 2.2Mbps Up over standard telephone wiring or better up to 22,500ft or 6.5km.
  • ADSL2+ DSLAM RJ-21 Telco connection for insertion into existing telephone system.
  • Maintains lifeline POTS service (one analog or digital phone line)per 8930 port.
  • Rapid Telco style installation - no programming required.
  • Supports IP routing, DHCP addressing, NAT-Network Address Translation.
  • Supports VoD (Video on Demand) and MPEG IP channels.
  • Supports VoIP (Voice over IP).
  • Network Equipment independence - Transparent to protocols/applications/MAC.
  • Supports QoS: IEEE802.1p/q.
  • Supports VLAN : 802.1Q tagged VLAN / Port based VLAN.
  • Supports Multicast : IGMP snooping.
  • Management
     - Telnet
    - MAC address number limit
    - DHCP client Function
    - Provide Console port(RS-232C)
    - SNMP v1, MIB II
  • Ethernet multicast / broadcast storm packet control and Flow control
  • Supports load sharing by port trunking (A,B uplink port)
  • Security
    - login account mgmt
    - Connection timeout
    - Remote IP access limit
  • 10/100 Mbps full-duplex service delivery to 8910 CPE (purchase as needed).

Product Highlights

  • Extreme distance Ethernet service delivery at a fraction of traditional costs.
  • Advanced ADSL2 Technology that delivers extended Ethernet over existing 1 pair telephone wiring or better up to 22,500' including active single POTS line. This means no new wiring is required.
  • Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
  • Quick install RJ-45 & RJ-11 connections to infrastructure for voice in and voice & voice/data out.
  • Rapid installation of 1U Rackmount profile

Product Specifications

  • Compatibility
        ITU G.ADSL Plus, Annex A, Annex M, G.Span, G.922.3, G.992.1, G.DTM,
       G.922.2 G.Lite, ANSI T1.413.
  • Data Rate
        100Mbps full-duplex at 830 CPE to LAN, w/ Data & Voice transmission.
  • Throughput
        24Mbps down / 2.2Mbps up.
  • Capacity
        830 LRE ports : 8 x LRE Ports (RJ-21 telco port)
        UPLINK: 1 x 100 Base-TX Ethernet port.
  • Interface
        Ethernet: RJ-45 Standard 10/100 Base-TX
        Voice/Data Line: RJ-21.
  • Power Consumption
        AC:90~240(90~254V)VAC,50/60Hz(47~63Hz),
        Power: 50W(Max).
  • Dimensions
        Height 45mm
        Depth 19" Rackmount 1U
        Width 390mm.
  • LED Display
        Subscriber Link : Display ADSL line sync
        LINK/ACT : 10/100-Base-TX status / Data TX/ RX
        10/100M : 10/100 Base-TX Speed(10M/100M)
        HALF/FULL : 10/100 Base-TX Transmission
        Mode
         PWR : System power supply
         ALM : System CPU error.
  • Environment
        Operational Temperature : 0∞C ~50∞C
        Humidity : 10%~90%, non-condensing.
For detailed installation and printable product information, please see the following documents.

Enable-IT 8935 Datasheet


Enable-IT 8935 Manual

Add to :  Add to Del.icio.usDel.icio.us | Add to Digg thisDigg  | Add to redditreddit | Add to Y! MyWebY! MyWeb | NewsVineSeed Newsvine