Description

The Enable-IT™ 260LP Gigabit Ethernet Lightning Protector is a set of compact weather resistant units that provide lightning and surge protection for CAT5 / CAT6 data applications. The units are fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100/1000 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed.

The internal High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +/- 15 volts on pins, 1, 2, 3 and 6 and +/- 58 volts on pins 4, 5, 7 and 8. The units are compatible with both normal and inverted polarity voltage PoE equipment.

For maximum protection this kit provides two 260LP units - one at each end of your CAT 5 or CAT6 cable run. Most PoE capable equipment is not protected from surges on CAT6 cabling. TThe Enable-IT™ 260LP Gigabit Ethernet Lightning Protector Kit is compatible with 10 Base-T, 100 Base-T and 1000 Base-T devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE).

The compact weather resistant housing features a single port access and a lockable hinged cover that will not close while wires are being terminated. Mounting holes are provided on the rear. A ground lug and terminal is provided in the lightning protector housing providing superior grounding. This lightning surge protector kit is compatible with Cisco Aironet 1100 and 1200 series access points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.

Specifications

Power

None required - passive components

Data Clamping at 30V      PoE Clamping at 65V

Connectors

Data - Dual 10/100/1000 Base-T LAN RJ-45 Jacks

Grounding Wire lug

Dimensions

Height 3" (78mm)  Depth 2" (49mm)  Width 4" (103mm)

Environment

Operational Temperature : -100°- +176°F (-40°- +80°C)

Humidity: 5% to 90%, non-condensing

Enclosure

Square Weather Resistant wallmount plastic casing

Features

• 10/100/1000 Base-T CAT6 protection.
• Power-Over-Ethernet (PoE) Compatible.
• Cisco© Reverse Polarity PoE compatible.
• Impact resistant enclosure that is sealed for weather resistant protection.
• Rubber sealed grommets for patch cord and grounding wire seal for weather resistant protection.
• Locking hinged cover for security.
• LAN In / LAN Out jacks, Grounding terminal Lug
• Supports 802.3af standard and reverse polarity Power over Ethernet devices

Highlights

• Superior performance and lowest cost over any competing technology.
  
• Longest warranty protection included exceeding any knockoff competitors.
  
• Broadband Ethernet Technology that delivers Gigabit Lightning Surge Protection in a confined space.
• Ideal for protecting any Ethernet data lines
• Quick install RJ-45 Ethernet connection
• Pricing ($129) is for a complete solution This kit includes the following:
  • (2) 260LP units
  • (1) 260LP Gigabit Ethernet Lightning Surge Protection Kit Installation Manual