Enable-IT™ 350 - 48V Power over Ethernet (PoE) Injector
| • Description | • Specifications | • Data Sheet (PDF) |
| • Features | • Highlights | • Product Manual (PDF) |
Description
The Enable-IT™ 350 20W - 48VDC Power over Ethernet Injector is single port IEEE 802.3af compliant Midspan solution that is a compact and easy to install with RJ-45 Ethernet cabling.
This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling,
providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.
The Enable-IT 350 PoE Injector can be used with the Enable-IT 380 PoE Range Extender/s to drive your full PoE strength up to 7,200ft.
The 350 unit is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go.
As a 802.3af compliant device, the Enable-IT 350 20W - 48VDC Power over Ethernet Injector uses 4 wires in a category rated wiring bundle, ie. CAT5e run. As will all PoE voltage drops over distance.
As a rule of thumb you will loose 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5.
You may need to use 18 gauge wiring. The Enable-IT 350 is a 20W - 48VDC power injector to maximize your distance and output.
Specifications
- Power
- 20W -48VDC Output 802.3af Power Over Ethernet Injector. AC Input (90 - 264VAC)
- US Type B 120VAC power cord provided - other country specific cords available
- Built in Auto-Recovery, Over-Voltage and Short Circuit protection
- Data Rate
- 10/100/1000Mbps full-duplex (Gigabit compatible)
- Interface
- (2) Ethernet RJ-45 jacks standard
- Dimensions
- Height 1.5" (40mm) Depth 3" (85mm) Width 2"(60mm)
- Environment
- Operational Temperature: 13°to 140°F (-0° to 40°C)
- Humidity: 5% to 95%, non-condensing
- Enclosure
- Rectangular plastic casing with dual RJ-45 Network ports
Features
- 20W -48VDC Output 802.3af Power Over Ethernet Injector.
- FCC Part 15 Class B & EN55022 Class B
- Rapid installation - no programming required.
- Maintains existing RJ-45 Ethernet Data (10/100/1000mbps).
- Supports VoD (Video on Demand) and MPEG IP channels.
- Built in Auto-Recovery, Over-Voltage and Short Circuit protection for your valuable PoE electronics.
- Supports VoIP (Voice over IP). Gigabit compatible
- Network Equipment independence - Transparent to protocols/applications/MAC.
- Fully Compliant detection, disconnect and voltage control IEEE802.3af
Highlights
- Can be used in conjunction with Enable-IT 380 PoE Range Extender/s up to 7,200ft.
- 10/100/1000 Gigabit compatible
- 20W - 48 VDC 802.3af compliant PoE Injector uses existing Ethernet cabling for strong output for your PoE devices.
- Over Voltage/Current, Short Circuit Protection Outputs equipped with short circuit protection and overload protection as per 802.3af specification except max average current is 0.55A, Peak 0.6A per pair
- Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
- Quick install RJ-45 connection to infrastructure for data input and PoE/data output.
- Pricing ($45) is for a complete solution
This kit includes the following:
- (1) 350 20W - 48VDC PoE injector
- (1) US Type B 120VAC power cord
- (1) Enable-IT 350 PoE Injector Manual
Ordering
Enable-IT's products are available for purchase through the following:
Authorized Resellers, Global Distribution or any of our global sales offices.
Volume discounts are available - inquire for a quote
For multi kit ordering the shopping cart is adjustable. Volume discounts quoted upon request. Resellers and Distributor inquires welcome.
You can also order over the phone directly - Call Toll Free Globally
| • Product FAQ List | • Live Support Chat | • Technical Support |
| • Product Warranty | • Support Forum | • Product Certifications |
Product Frequently Asked Questions List
Manufacturer Product Warranty Documents
Live Pre-Sales Technical Chat
Click to Chat Live for Pre-Sales Support Only.
Post sales support is only available via the Customer Support Portal
You can also order over the phone directly - Call Toll Free Globally
Manufacturer Technical Support
Manufacturer Product Certification Documents
