Today is July 3, 2009

Enable-IT 860 - 100Mbps Full Duplex Ethernet Extender Kit - The World's Highest throughput

Enable-IT 860 Out of the Box test cabling

The Enable-IT™ 860 Single-Line Ethernet Extender is a unique high speed solution that drives true 100MB throughput Ethernet data and single voice line up to 6,000ft or 1,828m distance over a 1-Pair (2 wire) telephone line wiring or better. These units use a industry standard RJ-45 (8-pin) connector for ease of use installation and supports the use of spare pairs for delivering a second voice line or your PoE signal transparently. (PoE signal will only be effective up to 1,500ft)

Hands down these are the highest throughput performing and most versatile Ethernet Extenders on the planet, bar none. These units are the most reliable and easy to install on any wiring. They put the over priced and lower performing competition to shame. Made in the USA with quality and pride - the only manufacturer to do so in this industry.

The 860 Series Solution is a pair of Ethernet line drivers that utilize existing 1-pair CAT 2 Telco wiring or better between each 860 series unit. The extenders stretch the reach of Ethernet to nineteen times the typical IEEE Ethernet specification distance of 328ft or 100m. It can even be used on live voice wiring transparently; try that with your expensive LRE. No other Ethernet Extender manufacturer supports voice over the same pair of wire with data. Only Enable-IT extenders can Enable-IT Shipping Enable-IT Guarantee

To increase the durability and extended use of the product providing maximum future technology protection, 860 Extended Ethernet Units have been designed to meet the challenge of modern switched LANs and allows you to add features and capacity as your network expands. The 860 units have been tested to provide full duplex transport up to 100MB/s over CAT2 cabling or better. These unit also support the use of standalone PoE injectors natively. A PoE injector can supply a 24v PoE device up to 1,500ft using this kit.

Product Features

Extended Ethernet with dual voice and native PoE over 1 or 2 pair existing Telephone wiring or category rated wiring.
Rapid LAN style installation RJ45 jacks - no programming required.
Maintains dual lifeline phone service (analog or digital telephone lines).
Supports VoD (Video on Demand) and MPEG IP channels.
Supports VoIP (Voice over IP).
Network Equipment independence - Transparent to protocols, applications and MAC addresses.
Sustained full-duplex service delivery end to end.
Native PoE support for any standalone PoE injector up to 1,500ft.

Product Specifications

Power
5v - 2A country specific switching wall adapters included.(120 - 260VAC)
Data Rate
100Mbps full-duplex, Data & Voice transmission
Interface
Ethernet: RJ-45 Standard 10/100 Base-TX autosensing
Voice/Data Line: RJ-11 - Dual line
Dimensions
Height 1.5" (38mm) Depth 3.75" (95 mm) Width 5.75" (146mm)
Environment
Operational Temperature : -4°F to 160°F (-20°to 70°C)
Humidity: 5% to 95%, non-condensing
Enclosure
Square wallmount plastic casing with Telco / Network port
runs 25% cooler than any metal casing competitor

Product Highlights

Superior performance over any competing technology.
Longest warranty protection included exceeding any knockoff competitors.
Broadband Technology that delivers extended Ethernet over existing 1 pair telephone wiring or better up to 6,000' including active dual telephone (POTS) line. This means no new wiring is required
Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
Quick install RJ-45 connection to infrastructure for voice in and voice & data out.
Pricing ($499) is for a complete solution
Includes the following:
    (2) 860 LRE units
    (2) 5' Black Ethernet patch cords
    (2) Country specific switching wall power adapters
    (1) 860 Ethernet Extender Installation Manual

For detailed installation and printable product information, please see
the following documents.