Today is July 3, 2009

Enable-IT 865 - Power over Ethernet (PoE) and 100Mbps Full Duplex Ethernet Extender Kit

The Enable-IT™ 865 Single-Line Ethernet Extender Kit is the world’s only available solution to deliver Voice, Data and PoE in a combined package that exceeds the IEEE distance limitations for all Ethernet equipment and 802.3af PoE. The 865 enables the simple installation of a PoE device up to 1,500ft (458m) From your LAN and Power Source. – This is ideal for installing PoE IP Security cameras or PoE WiFi Access Points or for a standalone remote self powered LAN up to 2,500ft (762m).

These extenders drive the reach of Ethernet to more than (7.7) seven times the typical Ethernet distance. 1,500ft/458m distance if using the PoE power to drive up to a 24v PoE device or 2,500ft/762m distance if using the PoE power standalone for the remote 865 CPE device only and LAN2 output for data/voice. The 865 kit can even be used on live voice wiring transparently; try that with your expensive LRE. No other Ethernet Extender manufacturer supports voice over the same pair of wire with data and PoE. Only Enable-IT extenders can. Made in the USA with quality and pride - the only manufacturer to do so in this industry.

To increase the durability and extended use of the product providing maximum future technology protection, 865 Extended PoE and Ethernet Units have been designed to meet the challenge of modern switched LANs and allows you to add features and capacity as your network expands. The 865 units have been tested to provide full duplex transport up to 100MB/s over CAT2 cabling or better. These unit also support the use of standalone PoE injectors natively.

Product Features

Extended Ethernet with dual voice and native PoE over 2, 3 or 4 pair existing Telephone wiring or category rated wiring.
Rapid LAN style installation RJ45 jacks - no programming required.
Maintains dual lifeline phone service (analog or digital telephone lines).
Supports VoD (Video on Demand) and MPEG IP channels.
Supports VoIP (Voice over IP).
Network Equipment independence - Transparent to protocols, applications and MAC addresses.
Sustained full-duplex service delivery end to end.
Native PoE support for any standalone PoE injector up to 1,500ft.

Product Specifications

Power
5v - 2A country specific switching wall adapter included.(120 - 260VAC)
Data Rate
100Mbps full-duplex, Data & Voice transmission
Interface
Ethernet: RJ-45 Standard 10/100 Base-TX autosensing
Voice/Data Line: RJ-11 - Dual line
Dimensions
Height 1.5" (38mm) Depth 3.75" (95 mm) Width 5.75" (146mm)
Environment
Operational Temperature : -4°F to 160°F (-20°to 70°C)
Humidity: 5% to 95%, non-condensing
Enclosure
Square wallmount plastic casing with Telco / Network port
runs 25% cooler than any metal casing competitor

Product Highlights

Superior performance over any competing technology.
Longest warranty protection included exceeding any knockoff competitors.
Broadband Technology that delivers extended Ethernet over existing 1 pair telephone wiring or better up to 1,500' including active dual telephone (POTS) line. This means no new wiring is required
Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
Quick install RJ-45 connection to infrastructure for voice in and voice & data out.
Pricing ($599) is for a complete solution
Includes the following:
    (2) 865 LRE units
    (1) 48VDC IEEE 802.3af Power Injector
    (2) 5' Black Ethernet patch cords
    (1) Country specific switching wall power adapter for CO unit
    (1) 865 PoE and Ethernet Extender Installation Manual

For detailed installation and printable product information, please see
the following documents.