The Enable-IT™ 8950 Multi-Line Ethernet Extender Concentrator is a 2-pair web smart manageable solution that drives Ethernet data and voice lines up to 12,000ft or 3.6km distance over a 2-Pair (4 wire) telephone line wiring or better.

The 8950 LRE pushes Ethernet and dual voice simultaneously through existing telephone line to the 850 LRE CPE units. The 8950 aggregates its upstream and downstream bandwidth through a dedicated Gigabit port (either copper or GBIC fiber module) to your Ethernet switching equipment or routers. These DSLAM units offer a significant cost savings for deploying multiple Ethernet Extension runs from a single location and can be rackmounted for convenience.
This Full duplex capability enables many Multi-Media services such as IPTV, VOD (Video on Demand), Voice over IP, and Video cameras - triple play support for any device. Each port on the 8950 supports 100MB full duplex to the remote (8) 850 LRE CPE units. For use with Enable-IT 850 LRE CPE units only, available individually

• Superior performance over any competing technology.
  
• Longest warranty protection included exceeding any knockoff competitors.
  
• Broadband Technology that delivers extended Ethernet over existing 1 pair telephone wiring or better up to 12,000' including active telephone (POTS) line. This means no new wiring is required
• Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
• Quick install RJ-11 jack to infrastructure for voice & data out.
• Quick install RJ-11 jack to infrastructure for duial PBX voice in
• The 8950 LRE Controller kit includes the following:
  • (1) Rackmount 8950 with (8) Dual Voice IN RJ11 Telco ports
    and (8) Voice & Data OUT RJ11 ports
  • (2) 1000MB (Gigabit) uplink port- (either copper or GBIC fiber module)
  • (1) 8950 User and installation Manual
  • (1) Country specific power cord.

Power

AC power socket (100 to 240VAC, 50-60Hz),
country specific power cord included.
Power Consumption 25 watts / 85 BTU

Data Rate

100Mbps full-duplex, Data & Voice transmission
Native PoE support for any standalone PoE injector up to 1,500ft

LED Display

8950 Operating Status : 8950 Power / System status
LINK/ACT : 850 CPE sync status / Data TX/ RX
Gigabit Uplinks Copper / Mini-GBIC : 10/100/1000 Base-TX Speed

Interfaces

CPE Interlink : (8) RJ-45 jacks - custom pinouts
(8) Dual voice line: RJ-11 jacks
(2) 10/100/1000 TX RJ-45 uplink
(2) Mini-GBIC fiber module port

Dimensions

Height 1.73" (44mm)  Depth 6.75" (172mm)  Width 10.5" (267mm)

Environment

Operational Temperature : -4°F to 160°F (-20°to 70°C)
Humidity: 5% to 95%, non-condensing

Enclosure

1U Rackmount steel casing with front facing ports

Regulation Compliance

FCC Part 15 Class A, CE

For detailed installation and printable product information, please see
the following documents.