Enable-IT 828 - Gigabit Full Duplex Ethernet ExtenderWorld's 1st Gigabit Ethernet PoE+ Extender - The OutReach Killer

Buy Now Request a Quote

Request a quote for this product

* is a require field

Name *
Phone # *
Email *
Qty Needed *
Please enter this verification code: *


For use on your PoE Midspan or PoE Injector

  • (1) Enable-IT 828 Gigabit & High Power PoE+ Ethernet Extender Unit - For use on your PoE Midspan or PoE Injector
  • Ideal solution for quickly installing up to (2) separate PoE IP Cameras or devices up to 1,200ft (360m)
  • Triple LAN port design with selectable PoE output on the two output LAN ports.

Shopping cart supports ordering multiple units. Volume discounts quoted upon request or via Enable-IT Resellers/Distributors. Resellers & Distributors click here for inquiries.


call me placeholder Click to have us call you Toll Free Globally for Pre or Post sales technical questions.

  • Extends standard Gigabit Ethernet Full Duplex 6 times beyond the IEEE barrier of 328ft (100m) with PoE+ 56V over CAT5e/6 or better wiring.
  • Three LAN port design allows for deployment of (2) separate PoE IP Cameras or devices up to 1,200ft (360m).
  • DIP switch selection enables you to turn on or off the PoE output for each port.
  • Rapid LAN style installation RJ-45 LAN Interfaces - no programming required.
  • Cisco / Motorola reverse polarity PoE compatible
  • Daisy chain up to (3) 828’s to 1,200ft (360m).
  • Ideal for deploying High Definition IP Cameras requiring Gigabit throughput at distance.
  • Supports VoIP (Voice over IP).
  • Network equipment independence - Transparent to protocols, applications and MAC addresses.
  • Sustained full-duplex service delivery end to end.
  • You must supply the PoE to power the 828 standalone unit or you can order the 828P Gigabit PoE Extender.
Product Description

The Enable-IT™ 828 Gigabit Ethernet Extension Unit is the world’s 1st and only for 4 years running copper Gigabit solution in the industry today. This 828 product is a standalone unit to be used with your PoE Injector or PoE Midspan. The standalone 828 can drive incremental Gigabit Ethernet to 800ft (240m). For installing PoE IP cameras, PoE Access Points and remote LAN segments - Nothing is more cost effective or simple to install. The three LAN port design allows for a laptop to be connected and quickly configure devices.

The Enable-IT 828 can drive industry standard Gigabit Ethernet signals to over six times the restricted IEEE standard Ethernet distance when combined in a series of multiple units and uses high power PoE+. This cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today.

The 828 Series Solution is a standalone powered Gigabit Ethernet Repeater that doubles the range of your Gigabit Ethernet to an unpowered remote location. This is ideal for installing high powered PoE+ cameras remotely using only a CAT5e or CAT6 rated 100m cabling. Selectable DIP switches allow for disabling PoE output on either output port to enable standard non PoE LAN devices such as a laptop to configure an IP camera. You can also daisy chain (2) 828 units to reach 1,200ft (360m) to power a 48v PoE device easily.

  • Extreme Broadband LAN throughput over 4-pair twisted pair cabling with PoE.
  • Longest warranty protection in the industry, exceeding any knockoff competitors.
  • Enables Gigabit Ethernet & PoE+ connectivity to LAN’s at a fraction of the previously costly fiber options.
  • Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
  • Quick install RJ-45 connection to LAN standard infrastructure.
  • Optimal Design for installing High Definition PoE IP Cameras up to 1,200ft (360m) distance.
  • Enable-IT 828 - Includes the following:
    • (1) Enable-IT 828 Gigabit & PoE+ Ethernet Extender Unit
  • Optional 828P PoE+ powered Kit This kit includes the following:
5V DC Self Powered from PoE Input
Data Rate
1000Mbps full-duplex Ethernet Data & PoE (802.3af) or PoE+ (802.3at)
Ethernet: (3) LAN RJ-45 Standard 10/100/1000BaseTX, MDI-X, Autonegotiate ports
Height 1.4" (35mm)  Depth 2" (51mm)  Width 3" (76mm)
Operational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing
Ruggedized metal wallmount casing with Triple Gigabit LAN Network ports

seals  About the Ethernet Extension Experts Same Day Free Shipping Ethernet Extenders Guarantee  Ethernet Extension Experts RoHS Compliance

Product Support Links

Live Pre-Sales Technical Chat

Warning: file_get_contents() [function.file-get-contents]: http:// wrapper is disabled in the server configuration by allow_url_fopen=0 in /nfs/c09/h03/mnt/134944/domains/ on line 173

Warning: file_get_contents( [function.file-get-contents]: failed to open stream: no suitable wrapper could be found in /nfs/c09/h03/mnt/134944/domains/ on line 173

Click to Chat Live for Pre-Sales Support Only.
Post sales support is only available via the Customer Support Portal

Call us Toll Free Globally

Support Forum

Visit the support forum

view product menu