The Enable-IT™ 828P Gigabit Ethernet and PoE+ Extension Unit is the world’s First copper Gigabit solution in the industry today. It can be used with your existing PoE switch, PoE injector or purchased as a kit with the Enable-IT 360 Gigabit & PoE+ 50W-60V Injector. The standalone 828 can drive incremental Gigabit Ethernet and your PoE+ to 240m or 800ft. This cost effective unit blows away any previous solution including fiber for very quick plug and go installation of PoE IP cameras, PoE Access Points and remote LAN segments.

The Enable-IT 828P can drive industry standard Gigabit Ethernet signals to over six times the restricted IEEE standard Ethernet distance when combined in a series of multiple units and uses PoE+ Power. This cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today.

The 828 Series Solution is a standalone PoE+ powered Gigabit Ethernet Repeater that doubles the range of your Gigabit Ethernet to an unpowered remote location. This is ideal for installing high powered PoE+ cameras remotely using only a CAT5e or CAT6 rated 100m cabling. Selectable DIP switches allow for disabling PoE output on either ouytput port to enable standard non PoE LAN devices such as a laptop to configure an IP camera.You can also daisy chain (4) 828 units to reach 610m / 2,000ft to power a 36v PoE device easily.

• Extreme Broadband throughput for delivering Voice, Data, Video over CAT 5/6 cabling with 56V PoE+
  
• Longest warranty protection included exceeding any knockoff competitors.
  
• Enables Gigabit Ethernet & PoE+ connectivity to LAN’s at a fraction of the previously costly fiber options
• Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and virtual private networking.
• Quick install RJ-45 connection to LAN standard infrastructure
• Optimal Design for installing High Definition PoE IP Cameras up to 610m distance
• Enable-IT 828P kit - Includes the following:
  • (1) Enable-IT 828P Gigabit Ethernet Extender
  • (1) Enable-IT 360 Gigabit & PoE+ Injector

Power

5v Self Powered from PoE Input

Optional 5v - 2A 2.5mm DC jack

Data Rate

Gigabit full-duplex Ethernet Data & PoE (802.3af) or PoE+ (802.3at)

Interface

Ethernet: (3) LAN RJ-45 Standard 10/100/1000 Base-TX autosensing ports

Dimensions

Height 1.4" (38mm)  Depth 2" (60mm)  Width 3" (85mm)

Environment

Operational Temperature: -49°F to 168°F (-45°to 76°C)

Humidity: 5% to 95%, non-condensing

Enclosure

Ruggedized metal wallmount casing with Triple Gigabit LAN Network ports