Enable-IT 1 Watt 2.4GHz Indoor Wireless Amplifier KitSMA extension to Amplifer kit

Buy Now Request a Quote

Request a quote for this product

* is a require field

Name *
Phone # *
Email *
Qty Needed *
Please enter this verification code: *


1W Indoor Amplifier Kit

  • (1) Enable-IT 1 Watt 2.4GHz Indoor WiFi Amplifier
  • (1) 6VDC country specific power adapter
  • (1) 1ft RG 316 coax SMA extension cable.
    Free Same Day shipping included

Shopping cart supports ordering multiple units. Volume discounts quoted upon request or via Enable-IT Resellers/Distributors. Resellers & Distributors click here for inquiries.


call me placeholderYou can also order over the phone directly
Call Toll Free Globally

  • Rapid installation leveraging your existing SMA WIFi AP/Radio and SMA detachable antenna.
  • Strong 1 Watt output, 17 dBm Transmit Gain and 14 db Receive - without adding antenna. Antenna type will add additional db gain.
  • Solid die cast Aluminum Construction for durability, protection and heat dissipation.
  • IEEE Standards Compliant. The 1 Watt Indoor WiFi amplifier complies with the IEEE 802.11 (B/G) specifications for Wireless LANs.
  • Lightweight .5lb amplifier with 1ft RG316 SMA extension cable.
Product Description

The Enable-IT 1 Watt Indoor Wireless Amplifier Kit is a powered plug and play bi-directional solution that can boost your existing indoor Wireless RF signal range up to 1,500ft through heavy plaster or concrete walls/floors. This 1W amplifier is the strongest allowed by the US FCC for commercial use and provides for greater throughput by increasing the receive sensitivity (14db Gain) and transmit power (17db Gain) and uses your existing SMA attached antenna.  The 1 Watt Indoor WIFi kit is ideal for use with 2.4GHz frequency hopping or direct sequence spread spectrum radio modems and other 802.11 (B/G) wireless equipment that has detachable SMA antennas.

The Enable-IT 1W Indoor WiFi kit includes a self-contained amplifier, wall power adapter and a SMA extension cable that attaches to your existing wireless SMA connector on your existing WiFi radio. Your existing antenna must be a screw on SMA connector to remove and re-attach to the amplifier kit, or you can substitute for another SMA connected antenna.  The amplifier kit is powered by a 12V wall power adapter and provides a low power 5mw input into the Booster.

The Active Power Control circuitry and firmware monitors the amplifier's output power and automatically adjusts to provide maximum output power regardless of cable length. This kit saves additional wiring costs by expanding existing wireless infrastructure - driving signals into distant, reflective corners and hard-to-reach areas.  It is perfect for covering large areas in warehouse environments, public areas, hotspots and in your home - anywhere you need extra range and coverage.

6v - 650mA Autosensing Switching wall adapter included.
Amplifier - Dual SMA male coax 50 Ohm
WiFi Signal
IEEE 802.11 b/g Maximum 14 Channels, depending on regulatory authorities
Height 2.2" (56mm) Depth 1.14" (29mm)  Width 3.5" (78mm)
Operational Temperature: -13°F to 160°F (-25°to 70°C)
Humidity: 5% to 95%, non-condensing
Square wallmount metal casing

seals  About the Ethernet Extension Experts Same Day Free Shipping Ethernet Extenders Guarantee  Ethernet Extension Experts RoHS Compliance

Product Support Links

Live Pre-Sales Technical Chat

Warning: file_get_contents() [function.file-get-contents]: http:// wrapper is disabled in the server configuration by allow_url_fopen=0 in /nfs/c09/h03/mnt/134944/domains/ on line 164

Warning: file_get_contents( [function.file-get-contents]: failed to open stream: no suitable wrapper could be found in /nfs/c09/h03/mnt/134944/domains/ on line 164

Click to Chat Live for Pre-Sales Support Only.
Post sales support is only available via the Customer Support Portal

Call us Toll Free Globally

Support Forum

Visit the support forum

view product menu