The EnableIT™ 350 30W – 48V Gigabit PoE Injector is a long distance driving, fast network performing, strong PoE Output IEEE 802.3af compliant midspan.
This 48V Gigabit PoE Injector is ideal for installing short range or long distance IP PoE devices and can be used up to 2,500ft when used with an Enable-IT PoE Ethernet Extender like the 828 Gigabit or 820 PRO.
This is a trusted Business Reliable Professional Grade IEEE 802.3AF Gigabit PoE Injector free of Chinese spyware that lurks in foreign made networking components. The value of your network communications should be a protected investment.
We are the seminal creators of this Ethernet Extension technology and this solution this is ideal for installing extended range PoE devices such as PoE VoIP phones, PoE WiFi Access Points, PoE IP cameras, PoE medical equipment, PoE security locks and much more.
[Gallery not found]
The EnableIT™ 350 30W - 48V Gigabit PoE Injector (Power over Ethernet) is single port IEEE 802.3AF compliant Midspan solution that is a compact and easy to install with RJ-45 Ethernet cabling. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.
The 350 Gigabit PoE Injector is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3AF compliant device, the Injector uses 4 wires in a category rated wiring bundle, i.e. CAT5e run required for Gigabit Ethernet.
The Enable-IT 350 is a 30W - 48V DC Gigabit PoE Injector is ideal for installing 6V to 48V IP PoE devices up to 2,500ft when used in conjunction with an Enable-IT PoE Extender. As will all PoE voltage drops over distance. As a rule of thumb you will lose 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring for best distance results.
AC Input (90 - 264VAC)
DC output 30W - 48V DC IEEE 802.3AF Power Over Ethernet Midspan Injector.
Country Specific power cord provided
Built in Auto-Recovery, Over-Voltage and Short Circuit protection
1000Mbps full-duplex Ethernet Data
Ethernet: (1) LAN RJ-45 10/100/1000 Base-TX autosensing shielded socket for LAN Input
(1) LAN RJ-45 10/100/1000 Base-TX autosensing shielded socket for PoE output.
Length 1.65" (42mm) Height 1.5" (24mm) Width 1.26" (32mm)
Operational Temperature: -4°F to 149°F (-20°to 65°C)
Humidity: 5% to 85%, non-condensing
Ruggedized black plastic casing.
Link, speed, PoE active, PoE error, Data in Port LED