The Enable-IT™ 828 3-port Gigabit PoE Extender Unit is a standalone PoE powered solution that drives incremental Gigabit Ethernet up to 240m or 800ft and can be deployed with up to 3 828 units in a series to reach 2,000ft (600m) at blazing fast Gigabit full wire speed. The unit requires PoE power from your own PoE source and is able to output Both 2-pair and 4-pair PoE to support your high powered PoE Devices.
This professional grade solution is ideal for putting your PoE devices where you need them and not where you are limited to by IEEE Ethernet distance restrictions.
This is a trusted Business Reliable Professional Grade Ethernet Extension without the high cost of fiber or unsecure wireless. Why risk your business data to lower quality imported equipment? The value of your network communications should be a protected investment.
This 828 Gigabit PoE Extender solution is ideal for installing extended range PoE devices such as PoE VoIP phones, PoE WiFi Access Points, PoE IP cameras, PoE medical equipment, PoE security locks and much more.
The selectable DIP switch allows for the disabling of PoE output on either output port to enable standard non PoE LAN devices such as a laptop to configure a PoE Device.
[Gallery not found]
The Enable-IT™ 828 Gigabit Ethernet Extension Unit is the world’s 1st and only for 4 years running copper Gigabit solution in the industry today. This 828 product is a standalone unit to be used with your PoE Injector or PoE Midspan. The standalone 828 can drive incremental Gigabit Ethernet to 800ft (240m). For installing PoE IP cameras, PoE Access Points and remote LAN segments - Nothing is more cost effective or simple to install. The three LAN port design allows for a laptop to be connected and quickly configure devices.
The Enable-IT 828 can drive industry standard Gigabit Ethernet signals to over six times the restricted IEEE standard Ethernet distance when combined in a series of multiple units and uses high power PoE+. This cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today.
The 828 Series Solution is a standalone powered Gigabit Ethernet Repeater that doubles the range of your Gigabit Ethernet to an unpowered remote location. This is ideal for installing high powered PoE+ cameras remotely using only a CAT5e or CAT6 rated 100m cabling. Selectable DIP switches allow for disabling PoE output on either output port to enable standard non PoE LAN devices such as a laptop to configure an IP camera.You can also daisy chain (3) 828 units to reach 2,000ft (600m) to power a 56V 50W PoE device easily.
5V DC Self Powered from your PoE Input
1000Mbps full-duplex Ethernet Data & PoE (802.3af) or PoE+ (802.3at)
Ethernet: (3) LAN RJ-45 Standard 10/100/1000BaseTX, MDI-X, Autonegotiate ports)
Height 1.4" (35mm) Depth 2" (51mm) Width 3" (76mm)
Operational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing
Ruggedized metal wallmount casing with Triple Gigabit LAN Network ports