The Enable-IT™ 828P 3-port Gigabit PoE Extender Kit is a complete solution that drives incremental Gigabit Ethernet up to 240m or 800ft and can be deployed with up to 3 828 units in a series to reach 2,000ft (600m) at blazing fast Gigabit full wire speed. Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.
This professional grade solution is ideal for putting your PoE devices where you need them and not where you are limited to by IEEE Ethernet distance restrictions.
This is a trusted Business Reliable Professional Grade Ethernet Extension without the high cost of fiber or unsecure wireless. Why risk your business data to lower quality imported equipment? The value of your network communications should be a protected investment.
This 828P Gigabit PoE Extender solution is ideal for installing extended range PoE devices such as PoE VoIP phones, PoE WiFi Access Points, PoE IP cameras, PoE medical equipment, PoE security locks and much more.
The selectable DIP switch allows for the disabling of PoE output on either output port to enable standard non PoE LAN devices such as a laptop to configure a PoE Device.
[Gallery not found]
The Enable-IT™ 828P Gigabit PoE Extension Solution is ideal for deploying your PoE Devices like IP PoE Cameras, PoE Sensors and PoE WiFi Access Points. These are the world’s 1st and only Weatherproof copper Gigabit solution in the industry.
This Full Gigabit solution comes with a high powered Enable-IT 360 56V 61W Gigabit PoE Injector. that powers the 828P Gigabit PoE Extender and your PoE devices with 2-pair and 4-pair PoE power. The single PoE injector can even power up the 828P and 3 other 828 units and your PoE device up to 2,000ft (600m) all from one 120 ~ 260V AC outlet - Nothing is more cost effective or simple to install.
The three LAN port design allows for deployment of two separate PoE devices. By default both output ports supply PoE power, however the unit can be configured at time of ordering for disabling PoE output on either or both output ports.
The Enable-IT 828P Gigabit PoE Extender is a very cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today. For Gigabit throughput make sure to leverage your existing or new CAT5e or better rated cabling
Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.
You can also daisy chain (4) 828 units to reach 2,000ft (600m) to power a PoE devices easily.
Enable-IT 360 56V 61W Gigabit PoE Injector- 120 ~260v AC Input 56V DC 61W Output
Enable-IT 828P uses PoE input Power and consumes less than 5v DC at startup and passes the rest through
Gigabit full-duplex Ethernet Data & PoE (802.3af) or PoE+ (802.3at)
Ethernet: (3) LAN RJ-45 Standard 10/100/1000BaseTX, MDI-X, Autonegotiate ports
Interlink: RJ-45 (1-Pair)
Height 1.4" (35mm) Depth 2" (51mm) Width 3" (76mm)
Operational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing
Ruggedized metal wallmount casing with Triple Gigabit LAN Network ports