The Enable-IT™ 865 PRO Quad port Gigabit PoE Extender kit is a flexible Long Reach High Powered PoE solution that is ideal to install your IP surveillance cameras, WiFi access points, VoIP phones and other PoE devices where you need, not where your limited to by false LAN distance restrictions.
This professional grade solution is ideal for putting your PoE devices where you need them and not where you are limited to by IEEE Ethernet distance restrictions.
This is a trusted Business Reliable Professional Grade PoE Extension without the high cost of fiber or unsecure wireless, which you can’t run PoE through. Why risk your business data to lower quality imported equipment? The value of your network communications should be a protected investment.
The 865 PRO Gigabit PoE Extender provides 2 or 4 pair PoE output on two LAN ports up to 2,500 ft (762 m) away. Or at time of ordering you can request PoE output on all 4 ports at no additional charge. Adding additional wattage draw does reduce overall distance reach, so if in doubt were happy to consult and ensure you have a solid plug and go solution.
[Gallery not found]
The Enable-IT™ 865 PRO Gigabit PoE Extender kit is an ideal solution to install your IP surveillance cameras, WiFi access points, VoIP phones and other PoE devices where you need, not where your limited to by false LAN distance restrictions. It can operate up to 3,500ft / 1,066m from you power and data source and supports any PoE enabled WiFi Wireless Access Point, Security camera or other PoE powered equipment. This eliminates the need for your installers adding power supply outlets and associated AC power cabling, providing an affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.
Using the provided High Powered 61W 56V Gigabit PoE Injector, a single (120V ~ 240V) IEC 320 C14 standard Country specific power cord input will deliver PoE power sufficient enough to deploy multiple 12V ~ 24V / 6W ~ 30W PoE devices anywhere you need to.
Keep in mind that all DC including (PoE) voltage drops over distance and thicker gauge wire will help this issue. As a rule of thumb you will lose up to 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power strength at distance due to impedance. Lower power strength increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use more pairs or wire or 18 gauge wiring as a dedicated DC power buss - like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our PoE Extenders or PoE DSLAM that can power a 56V 60W PoE IP PTZ Camera at 4,000 ft away.
CO unit - 12v / 1A DC country specific AC switching wall adapter included. (120-260V AC)
CPE unit - remote self powered uses 5v and passes remaining PoE budget to end PoE device
1,000Mbps full-duplex Ethernet Data
260Mbps Interconnect throughput
Ethernet: (4) LAN RJ-45 Standard 10/100/1000 Base-TX autosensing ports
Interlink: RJ-45 (2-Pair min)
Optimal power at distance, use 4-pair Cat5e or better wiring.
Height 1.4" (35mm) Depth 3.4" (86mm) Width 4.4" (111mm)
Operational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing
Ruggedized wallmount black Aluminum casing Optimized for heat extraction and isolation without fans.