The Enable-IT™ 8935 24-port Extreme Reach Extended Ethernet DSLAM provides 24 ports of voice and data services (25Mbps down / 3Mbps) over existing telephone or Cat 3-5 cable. Perfect for deploying Internet services such as VoIP, Web Surfing and general Internet access services into multi-unit dwellings and offices.
Engineered to deliver Ethernet more than SEVENTY-THREE times further than the IEEE 802.3 specifications for Ethernet LAN limits of just 328 feet / 100m. Leverage any 1-pair of existing or new wiring that is contiguous all the way up to 4.5 Miles (24,000ft) or 7.31km, effectively saving you thousands in labor, administration, and security.
This 24 port ADSL2+ Extended Ethernet DSLAM unit provides a maximum downstream rate up to 25 Mbps to the Enable-IT 830 Ethernet CPE units over 1-pair of active or unused telephone wiring. An ideal solution for those seeking to run Ethernet communications at extreme distances without the use of expensive fiber transceivers or special wiring.
[Gallery not found]
The 8935 Multi-Line Concentrator is a 1-pair solution that drives Ethernet data and voice lines up to 24,000ft or 7.31m distance over a 1-Pair (2 wire) telephone line wiring or better. The 8935 is an 24 port ADSL2+ DSLAM unit that provides a maximum downstream rate up to 25 Mbps to the 830 LRE CPE units.
The Enable-IT 8935 concentrator and 830 Ethernet modems are ideal for those seeking to run Ethernet communications at extreme distances without the use of expensive fiber transceivers or special wiring.
Each port on the 8935 supports 24MB downstream & 3MB upstream to the remote (8) 830 LRE CPE units. The Enable-IT 8935 is compliant with ITU Annex A, G.992.5, G.992.3, G.992.1, and incorporates backward compatible ITU G.ADSL Plus, G.span, G.992.3, G.992.1(G.DMT), ITU-TG.992.2 (G.lite), ANSI T1.413 issue 2 standards. The 8935 DSLAM performs automatic line configuration capabilities with multimode modulation to deliver optimal performance. When used with the Enable-IT™ 830 Extreme Reach Ethernet CPE - you are able to easily leverage your existing phone lines for high speed Internet access. Endpoint delivery is through any telephone jack to the provided telephone patch cord and DSL filter that enables you to keep existing live voice (POTS). This ADSL2+ technology is an enhanced version of the ADSL technology, which provides cross-talk free deployment.
ITU G.ADSL Plus, Annex A, Annex M, G.Span, G.922.3, G.992.1, G.DTM, G.922.2 G.Lite, ANSI T1.413.
100Mbps full-duplex at 830 CPE to LAN, w/ Data & Voice transmission.
25Mbps down / 3Mbps up.
830 LRE ports : 24 x LRE Ports (RJ-21 telco port) UPLINK: 2 x 100 Base-TX Ethernet port.
Ethernet: RJ-45 Standard 10/100 Base-TX
Voice/Data Line: RJ-21.
AC Input: (90~254V) @50/60Hz(, Power: 50W(Max).
Height 1.8" (45mm)
Depth Rackmount 1U 19" (482.6 mm)
Width 15.3" (390mm)
Subscriber Link : Display ADSL line sync
LINK/ACT : 10/100-Base-TX status / Data TX/ RX
10/100M : 10/100 Base-TX Speed(10M/100M)
HALF/FULL : 10/100 Base-TX Transmission Mode
PWR : System power supply
ALM : System CPU error.
Operational Temperature : 0∞C ~50∞C
Humidity : 10%~90%, non-condensing.