The Enable-IT™ 8420 - Super-G Dual Network WiFi Access Point
The Enable-IT™ 8420 Super-G Dual Network WiFi Access Point Hub is a very cost effective solution for solving the high costs associated with stretching your backbone with traditional WiFi access points.
The Enable-IT 8420 is designed for hospitality, commercial, residential, enterprise, meeting-place, and coffee shop facilities.
It provides the most advanced Super-G technology at present and can speeds up to 108Mbps. At the same time, it can be compatible with other 802.11b/g equipment.
The Enable-IT 8420 can act as a Access Point, Wireless Bridge or a Wireless Repeater and can also provide dual WiFi bridging for two separate wireless networks which are isolated from each other. It also has capabilities for creating isolated secure connections for private and public access at the same time both wirelessly and wired via the LAN ports. Its encryption algorithm and verification mode which adopt are the most advanced technology in the market at present, and it also supports WEP/WPA/WPA2/802.1X/ and Radius.
-
The 8420 Super-G Dual-Network WiFi Access Point/Hub can allow Internet access to visitors and guests while protecting your private network resources.
The 8420 achieves this by creating two networks.
The Private Network consists of users connected to the built-in 4-port switching hub, as well as users connected to the Private WLAN created by the 8420.
The Guest Wireless Network consists of users connected to the Guest WLAN. The Guest and Private networks are completely isolated from each other. Users on the Guest WLAN cannot access your private network resources on the Private Network.
-
DHCP Client Support. Dynamic Host Configuration Protocol provides a dynamic IP address to PCs and other devices upon request. The 8420 can act as a DHCP Client, and obtain an IP address and related information from your existing DHCP Server.
-
Upgradeable Firmware. Firmware is stored in a flash memory and can be upgraded easily, using only your Web Browser.
-
Standards Compliant. The 8420 Super-G Dual-Network WiFi Access Point/Hub complies with the IEEE802.11g (DSSS) specifications for Wireless LANs.
-
Security Features:
-
Separate SSID and Security Settings. The Guest and Private Wireless Networks have different SSIDs and Security settings, allowing your Private LAN to use high security while making the Guest Network easily accessible.
-
Isolation of Guest & Private LANs. The Guest and Private Wireless Networks are isolated from each other. PCs on the Guest Wireless Network cannot see (or attack) PCs or devices on your Private network. Layer2 client
isolation.
-
WEP support. Support for WEP (Wired Equivalent Privacy) is included. Both 64 Bit and 128 Bit keys are supported.
-
WPA support. Support for WPA is included. WPA is more secure than WEP, and should be used if possible.
-
WPA2 support. Support for WPA2 is also included. WPA2 uses the extremely secure AES encryption method.
-
802.1x Support. Support for 802.1x mode is included, providing for the industrial strength wireless security of 802.1x authentication and authorization.
-
Radius Client Support. The 8420 can login to your existing Radius Server (as a Radius client), as required to support WPA/WPA2 with Radius, or 802.1x.
-
Access Control. The Access Control feature can check the MAC address of Wireless clients to ensure that only trusted Wireless Stations can use the 8420 to gain access to your Private Network.
-
Password - protected Configuration. Optional password protection is provided to prevent unauthorized users from modifying the configuration data and settings.
-
Power:
Enclosure:
5v - 2A adapter Square metal casing with wall mount bracket
-
Connectors:
Environment:
Audio - RCA Left & Right Operational Temperature : 13°-140°F (-25°-60°C)
Video - BNC coax Humidity: 5%-90%, non-condensing
Transport - RJ-45 -
-
Dimensions:
Height 1" (24mm)
Depth 4.3" (110 mm)
Width 3" (77mm)


